Pro-Face Touchscreens
Pro-faceWe highly recommend Pro-Face Touchscreens as we use these products on Mobile Mining Equipment which is high vibration, dusty and in sunlit environments.
For more information on the Pro-face Product Line up, visit the Pro-face website: www.pro-face.com.au
Touch ScreensCAED Pty Ltd is pleased to announce that we are now the Pro-face Channel Partner in NSW.
For sales inquiries please contact us on:
Ph: 0249 912 567
Fx: 0249 915 567
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Laser
The Laser does not require a reflector and will detect even a black surface.
The operating range is between 200mm and 30 meters with an output of 4-20mA or RS422.
CAED Pty Ltd is a Certified Distribution Partner for Astech Angewandte Sensortechnik.
For sales inquiries please contact us on:
Ph: 0249 912 567
Fx: 0249 915 567
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Message Displays
LV-100 Message Display Unit:
Message display with 32 programmable messages. Any one of these messages are triggered by a single output from a PLC.
Industrial Message Display Unit:
Same capabilities as the LV100 with the added benefit of RS232 and RS485 communication interfaces.
Tilt switch
24VDC Non mercury type tilt switch.
Single axis Tilt Switch - trips at 45°
Dual axis Tilt Switch - trips at 45°
Buck & Boost Power Converter
Typical use is to output 24 volts when engine cranking to "hold up" the PLC supply voltage.
- Wide input voltage (8-40 VDC)
- Constant 24 VDC output
- Fully epoxy sealed
Dual Bar Graph Level Display
Display 2 separate level indications via 4-20mA signals from Bin or Tank Level Transmitters.
Low Voltage Threshold Module
Typical use is to detect a 0.5-5 VDC threshold on a proportional controller card and convert it to a 24VDC switched output.
Depth Indication by Laser System (DIBL)
A laser is used to indicate drill hole depth on the DIBL System. This introduces a reliable method of detecting depth without physical contact and avoids the problems associated with using encoders and pull wire devices on rope pull down drills.